Rust problems

[Simba]

Hello,

 

I've been having some issues with my Rust Custom command line. The server is able to start with no issues and even can load Oxide and all that jazz, but when I try to configure a custom command line in it refuses to work. The web console stops relaying the server logs and I don't see it starting up either.

 

I've attached a picture of the custom command line and the default command line. The biggest problem I've had is the level names. With the default configuration it would just load the benchmark map which is nothing if I tried to change the map through the custom command line.

 

If anyone can see an error I made please help me correct it.

 

Thank you

 

Images (Forums compress them too much): http://files.enjin.com/1236625/Other/Custom_Configuration.PNG, http://files.enjin.com/1236625/Other/Default_Configuration.PNG

Edited July 5, 2016 by Simba
Fixed jpg's

[Dennis]

A lot of things are incorrect.

Use +server.ip, +server.port, +server.hostname etc., not -port and -server.hostname. It's also +server.maxplayers. Google them if in doubt.

Remove the slash from datadir.

[Simba]

OK thanks for that. I did google for my doubts and all the things I found used "-" instead of "+" and the slash for the data dictionary was what came with the original config.

[Dennis]

It's not that it's incorrect using the slash, but it's not necessary. There's no need for it :-)

[Simba]

Hello,

 

Just tried to get it to launch and while it's launching, the web console is still not working and the world size is not changing. I fiddled around with it but nothing seems to be working. Was there a change to the max world size? It's raising to 6000 but not to 8000. Other than that. It's all working.

 

Configuration: http://files.enjin.com/1236625/Other/Changed_CommandLine.PNG

[Simba]

Hello,

 

I fixed the web console problem however the world size is still at 6000.

 

If anyone knows of a fix for this please let me know.

 

Thank you

[kroko]

i have the same problem where some commandlines wont work

[Ragonz]

Rust is doing my head in since the last update. It refuses to work as a limited user or even system on some servers but works ok on others but all our servers are installed from an image so are identical.

[KevinJ]

I'm having the same issue under TCadmin2, doesn't seem to want to run via TCAdmin.

However running via bat file as a user without TCadmin seems to work.

[LFA]

Start the windows audio service and set the startup to automatic.