Modern Warfare 3

avizeke · November 13, 2011

unfortunately the answer isnt conclusive, more a debate, i was looking for a conclusive answer. you stated though that you had more than two working. ? is this correct on one IP

i tried it also with BAT files with steam.dll and yet no luck either, i can only just get one server up

Lane · November 13, 2011

unfortunately the answer isnt conclusive, more a debate, i was looking for a conclusive answer. you stated though that you had more than two working. ? is this correct on one IP

i tried it also with BAT files with steam.dll and yet no luck either, i can only just get one server up

You can easily run multiple servers on a single IP .. you need only to correctly set the port addresses in your commandline.

Make sure you are setting ALL the ports in the example server.cfg.

avizeke · November 13, 2011

there has to be incriments thouh right ? from one server to the others.

i have looked and even gone off the server.cfg and still had issues. i cant seem to connect more than one server on one ip with MW3.

this could be due to how am doing the porting incriments.....

Lane · November 13, 2011

there has to be incriments thouh right ? from one server to the others.

i have looked and even gone off the server.cfg and still had issues. i cant seem to connect more than one server on one ip with MW3.

this could be due to how am doing the porting incriments.....

Of course you need to increment - I would suggest by 100.

avizeke · November 13, 2011

lane thanks for your input, appreciated. i havnt tried this yet but will try this tomorrow, i help run a gsp, would you be happy assisting more directly with this aspect.

Molten · November 14, 2011

Of course you need to increment - I would suggest by 100.

+1

This seems to work with 100

Thanks Lane

Lane · November 14, 2011

+1

This seems to work with 100

Thanks Lane

You're welcome.

**LFA** · November 14, 2011

Anyone want to test this config?

Features:

- Map rotation can be set in the commandline (useful for scheduled restarts with different configs)

- Supports custom commandlines

- Config editor for server.cfg

COD_MW3 - Windows.xml

avizeke · November 14, 2011

i now have two servers working at the same time thanks to lane. if there was a rep system on these forums your rep would go up lane

Does anyone know why the servers wont show in steam but only shows ingame instead

iw5mp_server.exe +set dedicated 2 +set net_ip 22.222.222.222 +set net_port 29037 +set net_queryPort 29150 +set net_authPort 8766 +set net_masterServerPort 29316 +set sv_maxplayers 10 +start_map_rotate +set sv_config server.cfg

--- output

version 1.2.359

Connecting to online services....

Connected to online services.

Executing server config "server.cfg"

Succeeded reading from default.dspl

Loaded 5 map entries

Loading DSR "TDEF_default.dsr"...

Loading Succeeded for DSR "TDEF_default.dsr"

-----------------------------------

Spawning map: mp_lambeth, gametype tdef

Initializing Steam Game Server: game port 28150, auth port 8766, query port 28416, gamedir modernwarfare3, version 1.0.0.0

Steam Game Server initialized as Internet Server.

No Steam Master Servers found. Server will LAN visible only.

Steam Game Server connected. Local IP 22.222.222.222, Public IP 22.222.2222.222, Game Port 28150

Steam Game Server is VAC Secure

Spawn map (mp_lambeth, tdef) complete.

-----------------------------------

Steam Master Servers found (2). Server will be Internet Server listed.

Molten · November 14, 2011

i now have two servers working at the same time thanks to lane. if there was a rep system on these forums your rep would go up lane

Does anyone know why the servers wont show in steam but only shows ingame instead

iw5mp_server.exe +set dedicated 2 +set net_ip 22.222.222.222 +set net_port 29037 +set net_queryPort 29150 +set net_authPort 8766 +set net_masterServerPort 29316 +set sv_maxplayers 10 +start_map_rotate +set sv_config server.cfg

--- output

version 1.2.359
Connecting to online services....
Connected to online services.
Executing server config "server.cfg"
Succeeded reading from default.dspl
Loaded 5 map entries
Loading DSR "TDEF_default.dsr"...
Loading Succeeded for DSR "TDEF_default.dsr"
-----------------------------------
Spawning map: mp_lambeth, gametype tdef
Initializing Steam Game Server: game port 28150, auth port 8766, query port 28416, gamedir modernwarfare3, version 1.0.0.0
Steam Game Server initialized as Internet Server.
No Steam Master Servers found. Server will LAN visible only.
Steam Game Server connected. Local IP 22.222.222.222, Public IP 22.222.2222.222, Game Port 28150
Steam Game Server is VAC Secure
Spawn map (mp_lambeth, tdef) complete.
-----------------------------------
Steam Master Servers found (2). Server will be Internet Server listed.

My servers are showing up fine, it takes a few mins (upto 10) for the steam master server to see your servers so give it time.

I have 3 servers on 1 ip right now all showing up fine and running perfect.

avizeke · November 14, 2011

I now have 5 servers up and fully working, not tested the steam aspect yet but still the servers show and list. Please note that if you have multiple ips, i find that the primary ip only works !

**LFA** · November 14, 2011

You need to enable "Only use the server's primary IP" in the game's settings.

zelatech · November 14, 2011

You can actually run mw3 servers even on different IPs.

ECF · November 14, 2011

Lane Rep +1

Will that work?

Molten · November 15, 2011

I can confirm you can have servers on multiple ip's per box.

DJzz · November 15, 2011

It'll run on multiple IPs but not all the ports bind correctly so you end up with the net_port binding on all IPs and even though the server will start and appear fine if people try to join a server not on the primary IP they could end up on a different server.

Check netstat -a from command prompt and look for anything on 0.0.0.0 with the net_port port. Until the net_ip binding is properly fixed it's safest to only run servers on the primary IP.

peace · November 16, 2011

Stupid question. Is there a console in MW3? I mean not rcon console that available on server but console in main menu.

Felipe T · November 18, 2011

Hey guys,

I have downloaded the MW3 Server files from Steam (View->Tools), but it's not going online on my PC.

Do I have to buy the game only for the purpose of running a dedicated server?

Also, what's the best config: the one for zelatech or LFA?

Tks

Felipe T · November 18, 2011

PS: The downloaded server files are 13GB, is it correct? Really big, no?

Goran · November 18, 2011

PS: The downloaded server files are 13GB, is it correct? Really big, no?

Yes, however the list of unneeded files is at

http://wiki.modsrepository.com/index.php/Call_of_Duty_8:_Unranked_Server_Files

which will narrow the install to approx 7GB

peace · November 18, 2011

Does any of you have problem with rcon? On some servers it just doesnt work. Doesnt respond to commands.

icekohl · February 13, 2012

Saw the new linux config thought I'd throw up my updated Win config. Will need some touching unless you want to advertise for me

Updates include

New server.cfg

Multi IP

Gametracker

COD_MW3 - Windows.xml

Sign In

Modern Warfare 3

Recommended Posts

Link to comment

Share on other sites

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Create an account or sign in to comment

Create an account

Sign in

Who's Online 0 Members, 0 Anonymous, 158 Guests (See full list)

Important Information