Fusion-i-Net Posted May 13, 2011 Share Posted May 13, 2011 Finally got our servers working but like everyone else we are finding high usage levels on the servers but even more confusing is the difference in CPU usage 8 Slot Server with 3 active players: CPU Usage: 17.68 Memory Usage: 219.86 MB Disk Usage: 1.23 GB 16 Slot Server with 2 active players: CPU Usage: 2.34 Memory Usage: 209.79 MB Disk Usage: 1.23 GB We created the 16 Slot with a dedicated CPU could this be causing the difference? Link to comment Share on other sites More sharing options...
NothinG Posted May 13, 2011 Share Posted May 13, 2011 (edited) - Change your spawnServer to: spawnServer mp/aquarium Finally got our servers working but like everyone else we are finding high usage levels on the servers but even more confusing is the difference in CPU usage 8 Slot Server with 3 active players: CPU Usage: 17.68 Memory Usage: 219.86 MB Disk Usage: 1.23 GB 16 Slot Server with 2 active players: CPU Usage: 2.34 Memory Usage: 209.79 MB Disk Usage: 1.23 GB We created the 16 Slot with a dedicated CPU could this be causing the difference? Problem with this is: We can dedicate CPU to Brink, but that gets very costly very fast. Maybe there is a problem with HiJack being turned on? Edited May 13, 2011 by NothinG Link to comment Share on other sites More sharing options...
ViolentCrimes Posted May 13, 2011 Share Posted May 13, 2011 What Game Compatibility does it use. Link to comment Share on other sites More sharing options...
Fusion-i-Net Posted May 13, 2011 Share Posted May 13, 2011 Uses HL2 but HLSW is showing Doom3 in the server query I did read somewhere that there was a TCAdmin update due with Brink Game Comp and Rcon. Link to comment Share on other sites More sharing options...
Lane Posted May 13, 2011 Share Posted May 13, 2011 Heres my commandline Here is the error i see in the brink console Your commandline is missing an argument, check page 2 of the PDF or go back a few pages here and re-read what has been posted - full working commandlines have been posted a few times. Link to comment Share on other sites More sharing options...
integrapynoy Posted May 13, 2011 Share Posted May 13, 2011 Your commandline is missing an argument, check page 2 of the PDF or go back a few pages here and re-read what has been posted - full working commandlines have been posted a few times. What is it that i am missing? I cant find it. Also keep in mind, like i previously mentioned, i am able to get the servers running, I currently have i think like 7-8 running. I just ran into this game shut down for this one machine. So its not a commandline issue, or else i would have problems system wide, not just with one machine. Also i have tested without TCAdmin involved, and just running if of one of the 3 bat files already in the system files and i still get the same problem. Link to comment Share on other sites More sharing options...
Lane Posted May 13, 2011 Share Posted May 13, 2011 What is it that i am missing? I cant find it. Also keep in mind, like i previously mentioned, i am able to get the servers running, I currently have i think like 7-8 running. I just ran into this game shut down for this one machine. So its not a commandline issue, or else i would have problems system wide, not just with one machine. Also i have tested without TCAdmin involved, and just running if of one of the 3 bat files already in the system files and i still get the same problem. I know your exact issue as I overlooked the same thing in the beginning - you are not setting the "net_serverPortAuth (default 8766) ? This is the port on which the server will authenticate with Steam". You need to set this in your commandline and increment it by at least 1. Link to comment Share on other sites More sharing options...
integrapynoy Posted May 13, 2011 Share Posted May 13, 2011 I know your exact issue as I overlooked the same thing in the beginning - you are not setting the "net_serverPortAuth (default 8766) ? This is the port on which the server will authenticate with Steam". You need to set this in your commandline and increment it by at least 1. Yeah so in TCAdmin it is set. I checked with one server that is working and the one that isnt and they are running exactly the same command line. Hmm...this is good maybe at least i can get this one server running. But its only 1 fail server so im not too worried, hopefully it just doesnt repeat itself in future installs. Link to comment Share on other sites More sharing options...
integrapynoy Posted May 13, 2011 Share Posted May 13, 2011 Yeah nope, still no go even after adding +net_serverPortAuth 8776. So that's not it. Link to comment Share on other sites More sharing options...
Lane Posted May 13, 2011 Share Posted May 13, 2011 Yeah nope, still no go even after adding +net_serverPortAuth 8776. So that's not it. Do you have AvP running on the same machine? Trying setting the Auth port to something higher as it is not the only game that uses this method and could be conflicting. I have one machine that refuses to connect unless you set the Auth port, others no Auth port and they work without issue. Almost positive the Auth port is your problem. If not, then I would best guess you are having another port conflict. Link to comment Share on other sites More sharing options...
xguju Posted May 14, 2011 Share Posted May 14, 2011 There was an update to Version 3 which seemed pretty recent to me. Can anyone else confirm that net_ip still does not work? Link to comment Share on other sites More sharing options...
integrapynoy Posted May 14, 2011 Share Posted May 14, 2011 Do you have AvP running on the same machine? Trying setting the Auth port to something higher as it is not the only game that uses this method and could be conflicting. I have one machine that refuses to connect unless you set the Auth port, others no Auth port and they work without issue. Almost positive the Auth port is your problem. If not, then I would best guess you are having another port conflict. Ah, i didnt know that you had that issue too. Well i'll do a little more digging and see what i can find. Thanks Lane. Link to comment Share on other sites More sharing options...
Johnny5_Hull Posted May 14, 2011 Share Posted May 14, 2011 We have the servers up and running, and on a dual quad core CPU 3.4ghz we have had a server up running, and at 16/16 players it is using only 4.5% CPU (Across cores). These are set with hiJacking Disabled. Not tested it yet with Hijacking enabled, will do so later today. We are having the issue though that 16 slot servers will just drop to 8 slots max after a while. Im thinking it might be a map based thing, but not confirmed yet. Anyone else experienced this? Also the issue with the server only running on the primrary IP is still there, tested this morning and it won't run if not set on the primrary ip. Link to comment Share on other sites More sharing options...
trancemode Posted May 14, 2011 Share Posted May 14, 2011 Were they able to fix the resource usage yet? Link to comment Share on other sites More sharing options...
Johnny5_Hull Posted May 14, 2011 Share Posted May 14, 2011 Well we are running the latest version, and don't appear to be running into the super high CPU usage that people were reporting, however, we weren't exactly getting hammered with it to begin with.... Hence my suspicion it was the Hijack setting being on causing the issue. Perhaps Randles can shed some light, he has been great so far at getting the info to us on here *Ends creeping* Link to comment Share on other sites More sharing options...
Flightwatch Posted May 14, 2011 Share Posted May 14, 2011 Since the last update all our brink game servers are crashing after a while. Can't find the issue. Link to comment Share on other sites More sharing options...
Brandon Posted May 14, 2011 Share Posted May 14, 2011 Well we are running the latest version, and don't appear to be running into the super high CPU usage that people were reporting, however, we weren't exactly getting hammered with it to begin with.... Hence my suspicion it was the Hijack setting being on causing the issue. Perhaps Randles can shed some light, he has been great so far at getting the info to us on here *Ends creeping* If your dual quad core has hyperthreading (ie 16 logical cores in windows) then each core accounts for 6.25% and means that 4.5% is using: ~70% of one cpu core. If your dual quad core does not have hyperthreading (ie 8 logical cores) then each core accounts for 12.50% and means that 4.5% is using: ~40% of one cpu core Hijacking makes no difference in CPU usage from the tests we have seen. Link to comment Share on other sites More sharing options...
Remyx99 Posted May 14, 2011 Share Posted May 14, 2011 (edited) like me and some others have stated over at the splashdamage forum: I run 4 servers at the same box (2003 server). 3 objective and 1 stopwatch, after the update only the stopwatch one have crashed several times, all running as close to the same config as possible (only changing gametype). Every server have been full 16 slots about all the time, running about 10% CPU each over 8 cores 2,5 xeon. EDIT: ohh, and I have a 2008 server also that does not have any fix yet. Brink servers start fine in windows manually, so I wonder what fix is the best to have them start, run and query through TCA? Edited May 14, 2011 by Remyx99 Link to comment Share on other sites More sharing options...
Alex C Posted May 15, 2011 Share Posted May 15, 2011 Does anyone have the config file they can post? I've looked through this thread and tried the one Target posted but it didn't work. Thanks Also, is it actually working 100% with TCAdmin for anyone yet? Link to comment Share on other sites More sharing options...
NothinG Posted May 15, 2011 Share Posted May 15, 2011 Mine was working with TCAdmin but that new patched screwed everything up for me. Going to have to debug and find out what broke what. Link to comment Share on other sites More sharing options...
SpikerNoob Posted May 15, 2011 Share Posted May 15, 2011 Okay... Finally got ours working. The trick was the increments. Here is my command line. +set net_ip %serverip% +set net_serverPort %serverport% +set net_serverPortMaster %queryport% +set net_serverPortAuth %customport1%+set si_maxPlayers %slots% +set exec_maxThreads 2 +exec server.cfg My ports are setup as follows. Server IP: %main server IP% Server Port: 27019 Query Port: 27020 RCON Port: 27019 Custom Port: 8771 When I add to HLSW I is my.ip.address: 27020 So if you used the default, the Ports should be set up like this. Server IP: %main server IP% Server Port: 27015 Query Port: 27016 RCON Port: 27015 Custom Port: 8767 And the HLSW entry would be my.ip.address:27016 Link to comment Share on other sites More sharing options...
brinkydink Posted May 15, 2011 Share Posted May 15, 2011 When's the TCAdmin update coming out with Brink compatibility? They said it would be here a couple days ago and still nothing... Link to comment Share on other sites More sharing options...
Flightwatch Posted May 15, 2011 Share Posted May 15, 2011 When's the TCAdmin update coming out with Brink compatibility? They said it would be here a couple days ago and still nothing... It is available for the beta testers. But you don't need this to setup a working Brink server. Just use HL2 compatibility for the moment. Link to comment Share on other sites More sharing options...
mcgee007 Posted May 15, 2011 Share Posted May 15, 2011 Okay... Finally got ours working. The trick was the increments. Here is my command line. My ports are setup as follows. Server IP: %main server IP% Server Port: 27019 Query Port: 27020 RCON Port: 27019 Custom Port: 8771 When I add to HLSW I is my.ip.address: 27020 So if you used the default, the Ports should be set up like this. Server IP: %main server IP% Server Port: 27015 Query Port: 27016 RCON Port: 27015 Custom Port: 8767 And the HLSW entry would be my.ip.address:27016 Could you upload yours with the default? Link to comment Share on other sites More sharing options...
integrapynoy Posted May 16, 2011 Share Posted May 16, 2011 We are having the issue though that 16 slot servers will just drop to 8 slots max after a while. Im thinking it might be a map based thing, but not confirmed yet. Anyone else experienced this? Seeing the same here too. From what i can tell it seems to be map based. But i havnt confirmed 100% yet. Link to comment Share on other sites More sharing options...
Recommended Posts